Proper Operation
Learn how your appliance is supposed to operate so you can determine if it is malfunctioning.
This page contains affiliate links. For more information visit our
FTC disclosure page.
- Visit our sponsor for parts:
Filling the Mold
Finally, the situation that exists near the end of the cycle (and the second revolution of the ejector blades) is shown in Figure 10. At this point the water solenoid switch is again affected by a depression in the cam, but this time, since the thermostat is open, the path the electricity takes is through the water solenoid, delivering water to the mold. In this circuit, 105 volts of the 120 volts are dropped through the solenoid valve, while the remaining 15 volts are dropped through the mold heater.
Click the banner to visit our sponsor to purchase parts:
