The Appliance Clinic - Major Home Appliance Repair Depot

Won't Stop


Icemaker Won't Stop at End of Cycle

Possible Causes:

Holding switch failure. With ejector blades in starting position, test between terminals "C" and "NO." If your meter shows continuity, replace the switch.

Icemaker Won't Stop when Bin is Full

Possible Causes:

  1. Shut-off arm linkage not in proper position.
  2. Shut-off switch failure. With the shut-off arm raised, test for continuity between terminals "C" and "NO." Replace the switch if continuity is shown.

All of the information in these Appliance Clinicprocedures is provided FREE OF CHARGE. No liability is assumed by theauthor for the accuracy of the contents or damages caused by the use ofthese procedures. By Oron Schmidt.

Sponsored in part by
The Repair Clinic